Disclaimer
Last updated: May 2026
This tool is provided for general guidance only and must not be treated as professional, engineering, electrical, gas, HVAC, structural, construction, legal, or regulatory advice.
All results must be checked by a competent qualified person before use. Users must verify calculations against the laws, regulations in force, standards, codes of practice, manufacturer instructions, inspection requirements, site conditions, and safety duties that apply in their territory or jurisdiction.
Relevant bodies, regulators, schemes, or standards may include, depending on the work and location, organisations and frameworks such as the HSE, local authority building control, Gas Safe Register, NICEIC, NAPIT, IET Wiring Regulations / BS 7671, British Standards, ISO standards, IEC standards, Building Regulations, Water Regulations, CDM duties, and any other applicable authority, code, or standard in force.
Mention of any organisation, scheme, regulator, or standard does not imply approval, certification, endorsement, authorisation, sponsorship, approval, partnership, or verification of Morlich Co or its tools.
Morlich Co accepts no liability for personal injury, property damage, unsafe work, failed inspection, regulatory breach, business loss, equipment failure, incorrect specification, or reliance on tool outputs.
General Information Only
All tools, calculators, converters, estimators, references, examples, and informational content provided by Morlich Co are supplied strictly for general informational and guidance purposes only.
No Warranty
Morlich Co makes no guarantees, representations, or warranties regarding accuracy, completeness, suitability, reliability, fitness for purpose, regulatory compliance, or engineering validity.
User Verification Required
All calculations, dimensions, ratings, outputs, engineering values, electrical sizing, drainage sizing, gas calculations, HVAC calculations, structural assumptions, and technical information must be independently checked and verified before use.
Regulations In Force
Users are solely responsible for ensuring that all work, installations, calculations, specifications, and decisions comply with all laws, regulations in force, safety requirements, local codes, industry standards, manufacturer instructions, site-specific requirements, inspection requirements, and testing obligations applicable to their jurisdiction.
Competent Qualified Persons
Any engineering, gas, electrical, HVAC, drainage, civils, structural, mechanical, or construction-related work should only be undertaken by suitably competent and qualified persons.
Institution and Standards References
Relevant bodies, authorities, schemes, or standards may include, depending on the work and location, the HSE, local authority building control, Gas Safe Register, NICEIC, NAPIT, IET Wiring Regulations / BS 7671, British Standards, ISO standards, IEC standards, Building Regulations, Water Regulations, CDM duties, and other applicable authorities, codes, schemes, or standards in force.
Any such references are provided for general awareness only. They do not mean Morlich Co is approved, certified, authorised, regulated, endorsed, sponsored, partnered with, or verified by those organisations or standards bodies.
Limitation of Liability
To the maximum extent permitted by law, Morlich Co shall not be liable for direct losses, indirect losses, consequential losses, personal injury, property damage, financial losses, business interruption, regulatory breaches, failed inspections, equipment failure, unsafe installations, incorrect specifications, or reliance on tool outputs.
Professional Advice
Users should seek independent professional advice where required.
Acceptance
By using this website, users acknowledge and accept this disclaimer in full.